Methods Of Operation - aflamo AV-WM36IMP Manual Del Propietário

Operation
Read and understand this entire owner's manual, including all safety
before plugging in or using this product. Failure to do so could result in electric shock,
fire, serious injury, or death.
Power
Plug the power cord into a AC 220-240 Volt outlet (see IMPORTANT SAFETY INFORMATION on
Pages 2 and 3). Make sure the outlet is in good condition and that the plug is not loose. NEVER
exceed the maximum amperage for the circuit. DO NOT plug other appliances into the samecircuit.

Methods of Operation

This electric fireplace can be operated by the CONTROL PANEL/TOUCH PANEL, or by the battery-
powered REMOTE CONTROL.
The operation and functions of the two methods are the same.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and
heed all warnings.
Control Panel / Remote Control Operation
BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
POWER
remote control. Turns off flame effect.
TIMER button: Controls timer settings to
turn off fireplace at selected time.
Settings range from 0.5 hours to 8 hours.
TIMER
FLAME button: Makes flame effect
dimmer and brighter.
NOTE: Flame effect stays on until power
button is turned off. Flame effect must be
FLAME
on for heater to turn on.
FUNCTION
www.aflamo.com
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off.
Power and all functions turn off.
1. Press once. Indicator light turns on.
Timer is set to 0.5 hours.
2. 2. Press again until desired setting is
reached. Display window shows setting.
1. Press once. Indicator light turns on.
Flame brightness effect gets changing.
2. Press again. until desired setting is
reached.
information,
11