Emos BCN-42D Manual De Instrucciones página 3

GB | Battery Charger
Safety Instructions and Warnings
Read the user manual before using the device.
Follow the safety instructions provided in this manual.
• Never charge batteries other than NiCd or NiMH of sizes
AA or AAA.
• Never recharge alkaline, zinc-carbon, lithium batteries, etc.
• To clean the product, use a slightly moistened soft cloth. Do
not use solvents or cleaning agents – they could erode the
plastic parts and cause corrosion of the electric circuits.
• This device is not intended for use by persons (including
children) whose physical, sensory or mental disability or
lack of experience and expertise prevents safe use, unless
they are supervised or instructed regarding the use of the
appliance by a person responsible for their safety.
Package Contents
BCN-42D battery charger
USB-A – 60 cm USB-C cable
EMOS AA 2700 battery
Instruction manual
Device Description
Basic Elements (See Fig. 1)
1 – LCD screen
2 – Charging slots
3 – USB-C port
4 – Cooling grille
5 – Control buttons
6 – LED breathing light indicator
Control Buttons (See Fig. 2)
1 – MODE button – mode selection
2 – CURR button – charging/discharging speed selection
3 – SLOT button – charging slot selection
LCD Screen (See Fig. 3)
1 – charging slot number
2 – charge/discharge time
3 – measurement of recharged/discharged capacity
4 – battery voltage
5 – charging/discharging current
6 – end of mode
7 – charging/discharging mode
8 – state of charge/discharge (10 segments total)
9 – capacity measurement/reconditioning mode
Power Cable (See Fig. 4)
1 – USB-C connector
2 – USB-A connector
User-Friendly Display
The device features a clear, user-friendly display with a wide
viewing angle and high contrast. The white characters are clearly
legible on the blue background and provide information about the
selected charging slot (CH1-4), charge/discharge time (h), charg-
ing/discharging current (A), charged/discharged capacity (mAh),
battery voltage (V), state of charge, selected mode (charging, dis-
charging, capacity measurement, reconditioning) and end of mode.
Charger Controls
MODE Button
1×
1×
4×
1×
CURR Button
* after holding the MODE button
SLOT Button
* after holding the MODE button
Charger Features
Detection of Faulty Batteries
The charger is equipped with detection of faulty or non-rechargeable
batteries and protection against reversed polarity.
Independent Charging
All 4 slots (see Fig. 1) can charge independently without mutual
interference. You can charge any combination of suitable recharge-
able batteries, namely: 1.2 V Ni-MH/CD: AAA, AA.
Safety Features
3
• The charger is controlled using the control buttons
(see Fig. 1)
• Pressing any of the buttons lights up the LCD screen when it
is turned off and activates the charger controls
• Holding the MODE button opens mode selection options
• Press the MODE button to select the mode of your choice
(CHARGE, DISCHARGE, TEST, CYCLE)
• The selected mode will start automatically after 8 seconds
• Holding the MODE button at any time while a mode is running
opens settings for selecting charging/discharging speed or
switching modes
• Pressing the CURR allows you to select charging/dis-
charging speed*
• Pressing the SLOT button switches between the charging slots
• The number of the selected charging slot will appear in the
top left of the screen
• You can then view the values for the selected slot or switch
modes and charging speed for the given slot*
• Smart identification of faulty/damaged batteries and
non-rechargeable batteries. If such a battery is placed in
the charger, the charger evaluates it, shows „Err" on the
screen, and all the segments will start flashing (see Fig. 3).
• Temperature protection function: If the protective tem-
perature switch detects that the interior temperature