Publicidad
Idiomas disponibles
Idiomas disponibles
5 ASSEMBLY
10
–
Join the turn signal plug-in connector on the right
on the left
–
Secure the turn signal cable in the brackets at the top.
–
Route connector and cables without tension and secure
with cable ties.
Guideline
Do not bend, pinch or damage the cables.
502786-01
–
Position cover by guiding the plug-in connector of the
headlight through the opening.
–
Hold the turn signal in area
the direction of travel, while pressing the cover tight at the
same time.
The cover engages with an audible click.
–
Repeat the operation on the opposite side.
502787-01
–
Mount and tighten screws
Guideline
Screw, cover
–
Mount and tighten screws
Guideline
Screw, cover
502788-01
bo
.
A
and carefully press against
8
.
M5
9
.
EJOT PT
K50x14
bn
and
5 Nm (3.7 lbf ft)
2 Nm (1.5 lbf ft)
Publicidad
