Publicidad
RESET MODULE/CONTROLLER
This procedure lets you delete the programmed memory from the module and controllers (transmitters).
PROCEDURE:
STEP 1
Press button 1 (about 5 seconds) until the LED begins
to flash.
DELETION OF SINGLE TRANSMITTER
STEP 2A
Within 10 seconds press OFF or other related button on
controller or sensor for a short time. The LED starts flashing
quickly and turns off. Deletion is complete.
PRESS TRANSMISSION BUTTON ON
CONTROLLER OR SENSOR
LED STARTS FLASHING QUICKLY AND TURNS OFF
1
MEC MODULE SMART 1
A
B
PRESS BUTTON 1
(about 5 seconds)
DELETION OF ALL THE SAVED TRANSMITTERS
STEP 2B
Within 10 seconds press the same button again and hold. The
LED starts flashing quickly and turns off. Deletion is
complete.
LED STARTS FLASHING QUICKLY AND TURNS OFF
PRESS BUTTON
SHORTLY
LED FLASHES
1
A
B
1
A
B
EN
5
Publicidad
