Uline H-7058 Instrucciones De Montaje página 3

8. Fasten tabletop panels (4) together by securing flat
bracket (G) with eight M5 x 19 mm screws (J). Tighten
screws with Phillips screwdriver. Repeat on the other
side of the table. (See Figure 5)
NOTE: Flat bracket holes can be started with
drill (optional).
Figure 5
Tighten
K
G
4
1
9. Mount floor glides (D) on outside legs (1) and
center leg (2). Floor glides (D) can be adjusted to
compensate for uneven floors. (See Figure 6)
Figure 6
1
PAGE 3 OF 9
ASSEMBLY CONTINUED
4
1
2
3
4
3
4
Tighten
D
1
1
2
3
4
3
4
10. With three people, turn the table over and set it
upright. (See Figure 7)
11. While positioning or moving the table, at least one
person should be in the middle to support the center
of the table.
Figure 7
1-800-295-5510
uline.com
0421 IH-7058