Intended Use; Technical Data; Before Starting The Equipment - EINHELL TE-OS 18/150 Li Manual De Instrucciones

18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.

3. Intended use

The equipment is designed for the sanding of
wood, iron, plastic and similar materials using the
appropriate sanding paper. The equipment is not
suitable for wet sanding.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................18 V
No load speed / motor: ............12000 RPM (min
No load speed / sanding surface:
............................................... 24000 OPM (min
Sanding area: .......................................................
......................... 6" x 6" x 4" (150 x 150 x 100 mm)
Orbit diameter: ................................
Weight (tool only): ......................... 1.5 lbs (0.7 kg)
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Anl_TE_OS_18_150_Li_USA_SPK7.indb 11 Anl_TE_OS_18_150_Li_USA_SPK7.indb 11
EN
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's con-struction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be
considered (for example, times in which the
electric tools are switched off and times in which
the tool is switched on but operates without load).
)
-1
)

5. Before starting the equipment

-1
Warning!
/ " (1.6 mm) Always remove the battery pack before making
1
16
adjustments to the equipment.
Be sure to read the following information before
you put the cordless equipment into operation:
•
Charge the battery pack with the charger
(battery and charger not included in
4460721). If a rechargeable battery is empty,
it must be recharged before you use the
equipment for the first time.
5.1 Fitting the dust collection box (Fig. 2-3/
Item 4)
•
Plug the dust collection box (4) onto the
vacuum cleaner connector.
•
The dust is extracted directly into the dust
collection box through the abrasive paper and
- 11 -
28.04.2022 10:30:23 28.04.2022 10:30:23