Style selections SGY-GHR1 Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
Install Mounting Rail to a Drywall Wall
1. Locate the studs using a stud finder.
2. Position the mounting rail (D) on the wall at a
convenient height.
3. Use a level to ensure the mounting rail (D) is
horizontal.
4. Mark hole center locations on the wall.
WARNING Ensure there are no live electric
wires or plumbing in the wall where you mount
the hose reel. Always use eye-protection when
using power tools.
5. Using a 7/32" (5.5 mm) drill bit, drill pilot holes
centered on the marks you made in step 4.
6. Hang the mounting rail (D) with the lag screws,
using a Phillips screwdriver to tighten the lag
screws.
Hardware Used
BB
x 4
CC
Install Mounting Clips
1. Hang the hose reel (A) on the mounting
rail (D).
2. Attach 2 mounting clips (E) to the bottom
rail (F), one at the far left and one at the far
right.
3. Mark hole center locations on the wall.
4. Remove hose reel (A).
x 4
7
5
6
7
A
D
D
F
E