Attachment Use Table - Kenmore BC3060 Manual De Uso Y Cuidado

2. Slide attachments onto handle as
needed. To use the bare floor brush,
align the middle hole on the floor brush
with the tab on the handle and push
onto together. The bare floor brush will
click into place. See ATTACHMENT USE
TABLE (page 14).
ATTACHMENTS ON WAND
1. To remove wand from PowerMate
wand in upright position.
2. Press wand release pedal with foot and
pull the wand straight up and out of
®
PowerMate .
ATTACHMENT
Crevice Tool
Bare Floor Brush
PowerMate
®
Dusting Brush
1. Always clean attachments before using on fabrics.
2. The 3-way On/Off switch should be in the FLOOR position.
ATTACHMENTS
®
, lock

ATTACHMENT USE TABLE

e B w t e n e
Furniture 1 Cushions 1
- 14 -
Wand
Release
Pedal
3. Slide attachments onto wand as needed.
To use the bare floor brush, align the
side hole on the floor brush with the tab
on the wand and push onto together. The
bare floor brush will click into place. See
ATTACHMENT USE TABLE below.
CLEANING AREA
Drapes 1
Stairs
a B e r a C p r t e d e
Floors Floors/Rugs
2
Walls