Escutcheon
2. Install the Escutcheon (optional)
NOTE
For installation on marble, do not use plumbers putty. Use
:
the self-adhesive gaskets provided. Remove the paper backing and
apply the gaskets (adhesive side down) over the outside holes.
- For 1-hole installations: The escutcheon, spacer, and O-ring are not
required. Slide the rubber washer over the faucet tubing and hose.
- Insert the faucet tubing and hose into the hole.
- For 3-hole installations: Apply a ring of plumbers putty to the
underside of the escutcheon.
- Insert the O-ring into the groove in the spacer.
- Slide the rubber washer, escutcheon, and spacer (O-ring side down)
over the faucet tubing and hose.
- Insert the faucet tubing and hose into the center hole, carefully
aligning the escutcheon. Press down on the escutcheon and remove
any excess putty.
A
1025490-2-
Faucet
Body
Hose
Rubber
Washer
4
Spacer
O-Ring
Kohler Co.