Distance Unit Setting For Instrument; Measuring; Single Distance Measurement; Max And Min Measurement(See "Figure E") - BizLine BIZ 790 394 Manual De Instrucciones

EN

3-5. Distance Unit Setting For Instrument

ft+in then continue to click the button for the next unit selection.
1
2
3
4
5

4. Measuring

4-1. Single Distance Measurement

4-2. Max and Min Measurement (See "Figure E")
This function is used for the transferring of measurements in
continuous measurement mode, the measuring tool can be moved
to the target, whereby the measured value is updated approx. every
0.5 seconds. The corresponding minimum and maximum values are
displayed dynamically in the first and second line.
As an example, the user can move from a wall to the required
distance, while the actual distance can be read continuously. For
continuous measurement, push button
continuous measurement appears in the display. And press MEAS
or Clear button again to stop the function. The function is terminated
automatically after continuous 500 times measurement.
MIN
6
e_Notice_BIZ 790394_v2.indd 6
Click the button longer to change the next type of unit, m, ft. in,
Distance
0,000 m
0,0 in
01/16 in
0,000 ft
0'0'' 1/16
Press to trigger the distance measurement. The
measured value is displayed immediately. Press this
key longer to trigger continuous measurement function.
You can press this key to stop the continuous
measurement and longer press will switch off the
device.
Figure E
Area
0,000 m
2
0,000 ft
2
0,000 ft
2
0,000 ft
2
0,000 ft
2
until the indicator for
MAX
Volume
0,000 m
3
0,000 ft
3
0,000 ft
3
0,000 ft
3
0,000 ft
3
20/05/2019 17:4