Important Safety Instructions - JORGENSEN PONY 60300 Instrucciones De Uso

IMPORTANT SAFETY INSTRUCTIONS

1. Do not load with more than 500 lbs. (227 kg) on the open table position. Do not leave heavy loads
on work surface for extended periods of time.
2. Ensure WORKTABLE is set up on firm, level ground. Check for stability before each use.
3. Do not apply an unbalanced load which could cause the WORKTABLE to tip over.
4. Do not use the tabletop as a stepladder or standing platform. Do not use the lower tool tray as a
stepping stool.
5. Be sure that the legs are fully open and extended.
6. On both open worktable or folded sawhorse positions the product should be securely locked before
use.
7. Avoid applying excessive force when clamping with the supplied clamps.
8. Safety attire guidelines:
- Do not wear loose clothing or jewelry, which can be caught in moving parts.
- Non-skid footwear is recommended when working outdoors.
- Secure long hair or wear protective hair covering to avoid it getting caught and potential injury.
9. Recommended personal protective equipment:
- Use safety glasses.
- Use face or dust mask when working operations that create or involve dust.
10. Do not cut or drill into the work surface as it may weaken supports and/or damage the product.
11. Caution required when using high temperature tools (heat guns, torch, solder iron, etc.) may
damage work surface and/or reduce clamping capability.
12. Do not store flammable liquids on the WORKTABLE.
13. When not in use, tools should be stored in a secure, dry place, out of the reach of children and
unauthorized usage.
SPECIFICATIONS
Weight Capacity / WORKTABLE
Weight Capacity / Sawhorse
Max Weight Capacity for Tool Tray
Table Top Dimensions
Max Clamping Span
Working Height
Weight
Check ponyjorgensen.com for product or distributor information.
Scan to view introduction video
500 lbs
1000 lbs
20 lbs
31" x 25"
29.5"
32"
32 lbs
2
EN