Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OPERATION: OPENING THE WORKTABLE
The portable clamping WORKTABLE is packaged completely folded.
To open:
1. Place the WORKTABLE upright on the floor.
2. Step on the 4 telescopic legs of the WORKTABLE with your both feet at the same time to lift the
WORKTABLE up. Make sure all four telescopic legs are pulled out and locked in place. (Figure 1)
3. Remove the safety straps on both sides. (Figure 2)
4. Open the legs fully until the tool tray is flat. The table legs and tool tray should create an "A" shape.
(Figure 3)
5. Raise each side of the tabletop with one hand, press the button inward, and with the other hand lift
the supporting bars and snap it into the slot under the tabletop. Then release the button so the
supporting bar is fixed and the table top is stable. (Figure 4)
(Note: Before each use, check and make sure that the tabletop is stable and supported by the
supporting bar.)
Beware of pinch points
Figure 1
Figure 3
3
Figure 2
3
Figure 4
2
Publicidad
