Publicidad
Idiomas disponibles
Idiomas disponibles
Perform an autozero during measurements (values are not recorded) (KP 110-RF)
It is possible to make the instrument to perform an autozero when values are measured but not recorded.
Keys must be activated.
• Disconnect the pressure tube from the instrument.
• Press "Select" to display the measurement.
• Press "OK" during 5 seconds.
The instrument performs the autozero: "0" is displayed on the screen.
• Connect again the pressure tubes.
The instrument returns to the measuring mode.
5 recording modes
KISTOCK can record in 5 different ways :
• ''Immediate'' mode records values according a predefined interval.
• ''Minimum'', ''Maximum'' and ''Average'' record automatically the calculation of minimum, maximum
or average of measured values during an interval of recording.
• ''Monitoring'' mode allows to get an accurate history report during error events to help troubleshoot-
ing, without stopping the measurement logging. To proceed this way, you just have to define:
- a record interval to be used whilst the readings are beyond the setpoints.
- a record interval for the values measured during each reading beyond the setpoints.
• Furthermore, you can also let your KISTOCK record non-stop (''loop'' recording option).
2 operation modes
• Autonomous mode: data download is made wireless through the Kilog RF software.
• Network mode: measurements are stored in the datalogger and sent to the computer at regular inter-
vals (in case of alarm, the information is directly sent to the computer). So KISTOCK memory is used as
buffer memory and is reset at each sending. In this mode, several Kistocks can be linked to a computer
at the same time.
3 modes dataset start
Once your recording mode has been set, you can launch your dataset:
• With a delayed start (with predefined date and time)
• With the software
• With push-button
6 modes dataset stop
You can stop your dataset:
• As per a date and time (if it was started the same way)
• As per a period
• As per a predefined number of recording points
• Once the storage capacity is full
• With ''Stop'' option of the software
• By holding ''OK'' key for at least 5 s, if this function has been previously activated by the software.
6
Mounting
KISTOCK can be mounted in different ways; you can also
move it or install it very easily.
• Magnetic mounting or wallmounting (see photos)
• Secured mounting (optional)
1
2
1. Wallmount and lace eyelet
2. Magnetic mounting
7
Accessories
Please refer to the data sheet to get more information about available accessories.
Maintenance: please avoid any aggressive
solvent. Please protect the device from any
cleaning product containing formalin, that
may be used for cleaning rooms or ducts.
Precautions for use: please always use the de-
vice in accordance with its intended use and within
parameters described in the technical features in
order not to compromise the protection ensured by
the device.
Publicidad
