Manuales relacionados para Truper TPN-883-2
Resumen de contenidos para Truper TPN-883-2
- Página 1 Manual Pneumatic Rivet Gun Applies for: Code Model 101896 TPN-883-2 TPN-883-2 WARNING Use oil continuously to lubricate the tool Read the entire manual CAUTION before using the tool...
-
Página 2: Tabla De Contenido
Manual before using the tool. Parts Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Notes Authorized Service Centers Warranty Policy TPN-883-2 ENGLISH... -
Página 3: Technical Specifications
Technical Specifications TPN-883-2 Code 101896 Description Pneumatic rivet gun Length and Height 7” x 11” Cylinder Diameter 3” Traction Force 1 984 lb Type of Rivet Blind rivet Rivet Capacity 3/32”, 1/8”, 5/32”, 3/16” Work Pressure 90 PSI Weight with no accessories 3.5 lb... -
Página 4: General Safety Warnings For Pneumatic Tools
General Safety Warnings for Pneumatic Tools Keep your work area clean, tidy and well lit. Wear the adequate personal protection equipment. CAUTION CAUTION Cluttered and dark areas can cause accidents. Use of eye protection, dust mask, anti-squid safety shoes, and protection helmet and safety gloves considerably Never use the tool in explosive environments or in the reduce risk of injuries. -
Página 5: Risk Control When Using Pneumatic Tools
Risk Control when Using Pneumatic Tools Injury Risk to Head and Eyes Prevent injury to head and eyes WARNING • Compressed air used with pneumatic • When operating pneumatic equipment wear tools may be dangerous. Objects like vices, burr, splinters, protecting eyeglasses complying with ANSI Z87.1 dust and other residues can get shot out at great speed Standard. -
Página 6: Parts
Parts Empty hose Nozzle Nose pieces Replacement jaws Head Vacuum feature Nail Trigger container Handle Adjusting Wrench Cylinder Wrench Air Intake Connection Assembly Nozzles Installation • You can install in the riveter the nozzle that fits best the rivet stem diameter. •... -
Página 7: Start Up
Start Up Air Inlet Connection Air Inlet Connection • Connect the air hose to the tool with the adapters (not included), fixing the female connector to the air inlet connection. • If using various pneumatic tools and only one compressor, a fast coupling (not included) is recommended, together with the adapter, to quickly connect and disconnect the tools and interchange them easily. -
Página 8: Maintenance
Maintenance Cylinder • Remove the cylinder cover (A). • Remove the cylinder piston (B) using a wrench. • Clean the inside, the piston shaft (C) and the ring (D). • Add grease into the inner wall of the cylinder and ring. •... - Página 9 Maintenance Lubrication Service • Pneumatic tools require constant lubrication through the • Service the tools every 3 months only in a entire service life and when operating. Authorized Service Center. Service • Compressed air used for the tool contains humidity. It and maintenance carried out by non-certified personnel can rust the tool mechanism.
-
Página 10: Notes
Notes ENGLISH... -
Página 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. AGUASCALIENTES DE TODO PARA LA CONSTRUCCIÓN... -
Página 12: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.