Ego Power+ SSA1200/SSA1200-FC Manual Del Operador página 15

4. Pull the shaft of the snow shovel attachment to verify that it is securely locked
into the coupler. If not, rotate the snow shovel shaft from side to side in the
coupler until a clear "CLICK" sound indicates that it is engaged.
5. Tighten the wing knob securely.
WARNING:
the equipment; check it periodically for tightness during use to avoid serious personal
injury.
2a
Red Line
Attachment Shaft
2b
REMOVING THE ATTACHMENT FROM THE POWER HEAD
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Press the shaft-release button and, with the button depressed, pull or twist the
attachment shaft out of the coupler.
Be certain that the wing knob is fully tightened before operating
Wing Knob
Arrow on the Attachment Shaft
SNOW SHOVEL ATTACHMENT — SSA1200/SSA1200-FC
Arrow on the Coupler
Red Line
Power-head Shaft
Shaft-Release Button
15