Publicidad
Idiomas disponibles
Idiomas disponibles
Care
and Cleaning of your Vacuum Sealer
To Clean Appliance:
Remove Power Cord from electrical outlet. Do not immerse in liquid.
Check Gaskets and around Drip Tray to make sure they are free from
food materials. Wipe off Gasket with a warm soapy cloth if needed.
Upper and Lower Gaskets may be removed for cleaning. Clean with
warm, soapy water and allow gaskets to dry before reinserting in
machine.
The Removable Drip Tray makes cleanup easy when small amounts
of liquids are inadvertently pulled into the Vacuum Channel during
vacuum process.
Empty Drip Tray after each use. Wash in warm soapy water or place
on top rack of dishwasher. Check for food residues in Drip Tray Slot.
Clean if needed. Dry thoroughly before re-inserting into
the appliance.
To Store Appliance:
Clean unit thoroughly as detailed above.
After the unit has been cleaned and allowed to fully dry, close lid
and push the Easy Lock Latch into the STORE (middle) position. This
setting will keep the lid closed but prevents any undue pressure from
being applied to the internal sealing gaskets of the unit.
Always leave lid latch in STORE position when not in use. Never store
lid in OPERATE position as Internal gaskets may become compressed.
When appliance is left in OPERATE position, the Gaskets become
compressed and the unit may not function properly.
Handheld Sealer Reservoir:
Empty Reservoir after each use.
Wash in warm soapy water.
Air dry before replacing.
To Remove Reservoir from handheld sealer, holding top portion (black
upper piece) firmly, pull lower reservoir down and off.
E11
www.FoodSaver.com
FM2900_21EFSM2.indd 11-12
FM2900_21EFSM2.indd 11-12
Troubleshooting
Remove all food
around gaskets
Lift Drip Tray out
Push the Latch into the
center position to store.
Problem
Solution
Seal LED
• Unit is overheated. Always allow 20 seconds between seals. Under heavy
flashing
usage, appliance will shut off automatically and Light will flash. Wait for 20
min. for unit to cool off.
• Always wait 20 seconds between seals. Latch was left in On position for 5
minutes and not being used reminding user to turn Latch to Open or Store
position.
• Latch has been left in OPERATE position: Gaskets may be compressed.
Unlatch and allow 10 to 20 minutes for Gaskets to expand.
• Vacuum pump running more than 120 seconds. Under heavy usage,
appliance will shut off automatically and Light will flash. See next section
Vacuum Pump is running, but bag is not evacuating.
Vacuum Pump is
• If making a bag from a roll, make sure one end of bag is sealed.
running, but bag
See How to Make a Bag from a FoodSaver
is not evacuating
• Adjust the bag and try again. Make sure the open end of the bag is down
inside the Drip Tray.
• Check for wrinkles in bag along Sealing Strip. To prevent wrinkles in the
seal, gently stretch bag flat while inserting bag into Drip Tray.
• Open unit and make sure Gaskets are inserted properly and there are no
foreign objects, dirt or debris on the Upper or Lower Gasket (See Care
and Cleaning).
• Latch has been left in OPERATE position: Gaskets may be compressed.
Unlatch and allow 10 to 20 minutes for Gaskets to expand.
• Make sure the accessory hose is not attached to accessory port.
• Make sure the lid is latched down all the way. If the Latch does not catch
the lid and bring it down, there will be a leak between the Gaskets.
Gasket is loose or
• Take out the gasket, clean it and re-insert the Gasket into the Vacuum
has a tear
Channel (See Care and Cleaning pg. E11).
• Gasket is available for purchase on FoodSaver.com or
by calling 1-877-777-8042.
Bag is not sealing
• Too much liquid in bag, freeze before vacuuming.
properly
• Check for food debris around seal area. If present, take out the gasket,
clean it and re-insert the Gasket into the Vacuum Channel (See Care and
Cleaning pg. E11).
• Bag has wrinkles: To prevent wrinkles in the seal, gently stretch bag flat
while inserting bag into Gasket.
No lights on the
• Make sure unit is plugged in.
control panel
• Make sure wall outlet is functional.
• Make sure lid is all the way down, and the Latch is in the OPERATE position.
Customer Service: 1 (877) 777-8042
®
Vacuum Sealing Roll.
E12
2021/11/12 上午11:05
2021/11/12 上午11:05
Publicidad
