Fluidmaster PerforMAX K-400H-040 Guía De Instalación Rápida página 3

STEP 2: REMOVE OLD PARTS
A: REMOVE CONNECTOR
Remove water supply
connector from bottom of
fill valve by twisting con-
nector nut to the left.
NOTE: Inspect water
supply connector.
Replace it if it is worn, or
you don't know how old it is, to
Towel
prevent flooding and property damage.
(Optional)
B: REMOVE OLD LOCKNUT
Below tank, twist locknut
to the left to remove from
fill valve.
C: REMOVE OLD FILL VALVE
Including refill tube, refill
clip and shank washer.
Drain any excess water
into bucket by removing
fill valve from tank.
(Pull fill valve up)
Bucket
(Optional)
4
STEP 3: REMOVE OLD FLAPPER
A: REMOVE FLAPPER CHAIN
Pinch clasp to unhook
chain from tank lever.
B: REMOVE FLAPPER FROM
FLUSH VALVE SEAT
Simply unhook or lift flapper
arms off the flush valve
mounting posts, depending
on the type of flapper.
Tank Lever
Mounting
Post
Mounting
Post
5