Publicidad
Idiomas disponibles
Idiomas disponibles
EN
B. MASTER SECTION
17. LINE SWITCH (3.5)
Press this button while connecting the LINE IN
port for the stereo input signal.
18. BAL
The BAL control sends continuously variable
amounts of the post fader signal to either the
left or right main buses. In the center position
equal amounts of signal are sent to the left and
right buses.
19. STEREO GRAPHIC EQ
This 7-band graphic equalizer adjusts the main
mix output.
20. PHANTOM SWITCH
Press in this switch to add phantom power to
all the XLR microphone inputs of the mixer, the
LED turns on when it's working.
21. POWER LED
This LED comes on when the mixer is plugged
into the AC mains supply, and the rear panel
power switch is on.
22. METERS
These meters have 2 columns of 10LEDs each, they indicate the stereo signal strength of the main mix after
the main fader.
23. PRESET DISPLAY
This display show the number of the currently selected effects preset..
24. PRESET AND TAP DELAY
Rotate this knobs to increase or decrease the number of the preset. When you stop the rotation, that preset
will be loaded.and become operation.. The current preset number is show in the display. The knob also offers
a tap delay function for the preset 17 to 24. The LED will flash in time with the new tap delay time.
25. INTERNAL FX MUTE and LED
When engaged, the internal effects processor is muted,and the adjacent LED will come on..The footswitch
connection become disabled and the footswitch can't be used to mute or un-mute the effects.
26. USB / S.D. JACK
This is USB / SDCARD Jack.
AMX Series
17
23
24
25
18
- 4 -
19
20
21
26
User Manual / Manual de uso
22
Publicidad
