Publicidad
Idiomas disponibles
Idiomas disponibles
3. Safety
3. Safety
3.1 Explanation of symbols
EN
3.2 Intended use
The pressure gauges in DirectDrive design should be used exclusively for measuring
static pressures in dry, gaseous, not highly viscous and non-crystallising media that will
not attack copper alloy parts. The process connection and the measuring line must be
dry and free from foreign bodies. Avoid rapid and frequent load cycles.
The scope of application is defined by the technical performance limits and materials.
The pressure gauges have been designed for industrial applications in indoor and
outdoor areas. This instrument is no "safety accessory".
Maximum pressure limitation
Steady: 3/4 x full scale value (corresponds in further course to the described max.
■
permissible operating pressure, marked by "PS")
Short time: Full scale value of the pressure scale
■
Permissible temperature ranges
Ambient: -20 ... +65 °C
■
Medium: -20 ... +65 °C
■
Storage: -40 ... +70 °C
■
6
WARNING!
... indicates a potentially dangerous situation that can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to property or the environment, if not avoided.
WARNING!
... indicates a potentially dangerous situation that can result in burns,
caused by hot surfaces or liquids, if not avoided.
Information
... points out useful tips, recommendations and information for efficient
and trouble-free operation.
WIKA operating instructions models PG81 and PG91
Publicidad
