Declaration Of Compliance - Battipav MIXIT Manual De Instrucciones

Battipav srl
DISPOSAL
If the machine or parts thereof must be scrapped, the materials must be disposed of according to the provisions of the
legislation in force.
Machine frame
Electric Motor
Basket
W.E.E.E. IT08020000002803
The European Directive 2012/19/EU arranges that in the event of scrapping of electrical equipment, they must not be
disposed of city solid refusals but collected separately, in order to optimize the level of recovery and recycling of the
materials and above all in order to prevent damages to health and environment. To comply with European Directive
2012/19/EU, all electrical equipments must be marked with crossed basket symbol. The packing of the machine will be disposed of
in accordance with the methods laid down by current legislation. For further information concerning disposal of electrical
equipment, please refer to public administration service.
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules.
Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable
danger to the user.
Malfunctions not related to a conformity defect that exists at the time of purchase are excluded from the warranty. Exclusions
include:
• Wear of materials (taking into account the average life of the product)
• Failure to comply with the recommendations contained in this manual.
• Maintenance and tampering carried out by unauthorized personnel.
• Use of non-original spare parts.

DECLARATION OF COMPLIANCE

BATTIPAV SRL (Z.I." Via Cavatorta 6/1-48033 Cotignola (RA) ITALY tel. 054540696 - info@battipav.com - www.battipav.com)
Declares under its sole responsibility that the product:
Series: MIXIT
Item model: specified in TABLE 1 (Page 2)
Type: hereby declares that the mixer for adhesives for tiles, paints and epoxy resins
To which this declaration refers, complies with the provisions of the following Directives:
2006/42/EC (MD), 2014/35/EU (LVD), 2014/30/EU (EMC), 2011/65/EU (RoHS II)
Reference to harmonised standards: EN60335-1:2012+A11:2014, EN ISO 12100:2010
Date of manufacture - Serial number (on the cover)
Polyamide Steel Aluminium Copper
GB
Polyethylene
17