For Your Safety - Nokia Comm Band+ Guia De Inicio Rapido

6. Mic arm adjustment
EN
7. Microphone windscreen
Apply the microphone windscreen
to reduce wind or breathing noise.
Product and safety information
Remote control functions may vary depending on the model of your
device and application. Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need to be in direct line-of-sight.
Bluetooth devices must, however, be within 10 meters (33 feet) of each other,
although the connection may be subject to interference from obstructions
such as walls or from other electronic devices.
Frequency Band: 2400 MHz - 2480 MHz
Maximum Radio Frequency Power: -6~+4dBm

For your safety

Important: Read these simple guidelines. Not following them may
be dangerous or against local laws and regulations. For further info,
read the complete user guide.
Switch off in restricted areas
Switch the device off when a Bluetooth headset use is not allowed
or when it may cause interference or danger, for example, in aircraft,
in hospitals or near medical equipment, fuel, chemicals, or blasting
areas. Obey all instructions in restricted areas.
7
Interference
All wireless devices may be susceptible to interference, which could
affect performance.
Batteries, chargers, and other accessories
Use only batteries, chargers, and other accessories approved
by HMD Global Oy for use with this device. Do not connect
incompatible products.
Protect your hearing
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Hearing
Warning: When you use the headset, your ability to hear outside
sounds may be affected.
Do not use the headset where it can endanger your safety.
Small children
Your device and its accessories are not toys. They may contain small
parts. Keep them out of the reach of small children.
Take care of your device
Handle your device with care. The following suggestions help you keep your
device operational.
- Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that corrode electronic circuits.
- Do not use or store the device in dusty or dirty areas.
- Do not store the device in high temperatures. High temperatures may
damage the device or battery.
- Do not store the device in cold temperatures. When the device warms to its
normal temperature, moisture can form inside the device and damage it.
- Do not open the device other than as instructed in the user guide.
- Do not drop, knock, or shake the device or the battery. Rough handling can
break it.
- Only use a soft, clean, dry cloth to clean the surface of the device.
- Do not paint the device. Paint can prevent proper operation.
Recycle
Always return your used electronic products, batteries and
packaging materials to dedicated collection points. This way you
help prevent uncontrolled waste disposal and promote the recycling
of materials. Electrical and electronic products contain a lot of
valuable materials, including metals (such as copper, aluminium,
steel, and magnesium) and precious metals (such as gold, silver, and
palladium). All materials of the device can be recovered as materials
and energy.
8
EN