3TECH LED-3200 Manual De Usuario página 15

Light intensity
Depth of solidifi cation
Work Mode
Power source
Charger
Operation Mode
Protection type against
electrical shock
Protection degree against
electrical shock
Protection against harmful
ingress of water or
particular matter ordinary
equipment
Safety in the presence of
fl ammable anesthetic
mixture with air, oxygen
or nitrous oxide
Weight
Dimension
4. Installation
– The top of the unit can be turned 360 degrees to both left and right, it is forbidden to
remove when working. lnsert the top of the unit into the main unit in rotation mode.
– When the battery needs to be charged, connect the plug of the adapter into the ac
100V- 240V power supply. Then connect the output plug of the adapter to the de DC
5V input jacket of the charger, then put the main unit into the charger and connect it to
the charger station terminal.
5. Operation
– The device is not provided sterile and is not intended to be sterilized when used. To
prevent cross contamination, users must cover the device with a FDA cleared barrier
sheath sleeve before use. lt should be changed between each patient.
– Press the P/T button, following four modes are available: Normal Mode: screen show
P1. Press the P/T button to select of time which could be 5, 10, 15, 20 seconds.
– Pulse Mode: screen show P2. Press the P/T button to select of time which could be 5,
10, 15, 20 seconds.
– Strong Mode: screen shows P3. Press the P/T button to select of time which could be 3,
6, 9 seconds.
– Super Mode: screen shows P4. Press the P/T button to select of time which could be 1,
2, 3 seconds.
– During the operation, aim the top of the main unit, at the correct position, press the ON/
14
800 mW/cm to 3200 mW/cm
2
> 2 mm
– Normal Mode (P1): 5, 10, 15, 20 seconds, 800-1000 mW/cm²
– Pulse Mode (P2): 5, 10, 15, 20 seconds, 800-1000 mW/cm²
– Strong Mode (P3): 3, 6, 9 seconds, 1200-1400 mW/cm²
– Super Mode (P4): 1, 2, 3 seconds, 3000-3200 mW/cm²
Rechargeable Lithium battery, 3,7 V / 2000 mAh
Power Input: 100 V to 240 V, 50 Hz/60 Hz
Input Power: 10 VA
Power Output: DC 5V / 1A
Intermittent operation
Class ll
Type B
IPX0
Not suitable under this condition
136 g
24 (W) x 240 (H) mm
2