Suction Control; Height Adjustment - Uline Shark Rotator Lift-Away Manual Del Usuario

SUCTION CONTROL

NOTE: This unit is
equipped with a suction
control collar to help
with push and pull on
high pile carpets and
area rugs, and to release
suction when dusting
delicate objects or
drapery. Located at base
of top handle, rotate the
collar 90º to minimize suction. Rotate back for
maximum suction. (See Figure 18)
POWER BUTTONS
1. POWER button (A) turns on suction only. This is ideal
for use on bare floors and delicate area rugs, and
for use with accessories. (See Figure 19)
Figure 19
A
2. BRUSH ROLL button (B) spins the floor brush, which is
ideal for use on carpeted surfaces. (See Figure 19)
NOTE: The floor brush will only spin once the
vacuum is reclined back.

HEIGHT ADJUSTMENT

NOTE: The floor nozzle has been optimized to
work on all types of carpets as well as bare
floors so there is no need to adjust heights for
different surfaces.
PAGE 6 OF 27
Figure 18
B
OR
FEATURES
CORD HOOKS
NOTE: For quick cord
access, rotate upper hook
180° and remove cord.
Rotate it back for cord
storage. (See Figure 20)
HEADLIGHTS
Designed to illuminate debris
in dark areas, the headlights
illuminate any time the power
is on. The headlights are
designed to last the life of the
vacuum. (See Figure 21)
FILTERS
Remember to clean filters
regularly under normal use.
NOTE: For optimal
performance, tap filters
clean between washes.
(See Figure 22)
Figure 20
Figure 21
Figure 22
0622 IH-10108