Cleaning Filters - Uline Shark Rotator Lift-Away Manual Del Usuario

EMPTYING DUST CUP
1. Pull up on dust cup
release hatch and lift
dust cup off pod.
(See Figure 23)
2. Hold dust cup over a
garbage bag or can.
Press bottom empty
release latch.
(See Figure 24)
3. Press top dust cup
release latch to access
dust screen and remove
built-up debris as
required. (See Figure 25)
PAGE 7 OF 27
MAINTENANCE
Figure 23
Figure 24
Figure 25
4. With dust screen
removed, turn dust cup
over and empty upper
chamber by holding it
by the recessed handle
underneath the dust cup.
(See Figure 26)

CLEANING FILTERS

With dust cup removed, remove and rinse foam and felt
filters every three months. Let air dry completely before
replacing. Hand-wash only. Tap loose dirt off filters
between washes as needed. (See Figure 27)
NOTE: Once a year, open filter grill and remove
and rinse the HEPA filter. Let air dry completely
before replacing. Hand-wash only.
(See Figure 27)
Figure 27
HEPA
Filter
Figure 26
Foam Filter
Felt Filter
0622 IH-10108