LORGAR LRG-CMT313 Manual De Instrucciones página 3

INTRODUCTION
This device is operating on the principle "Plug and Play". Please connect or
insert necessary device with correct port.
Please turn the volume down when plugging the
microphone into the USB port, and gradually increase
the volume to an ideal level.
Volume up:
Clockwise (Turn right)
Volume down:
Counter-clockwise (Turn left)
Mute:
Counter-clockwise (Turn left to the
maximum turning point)
1.Unscrew the threaded metal
ring from the microphone, install
the pivot mount, and screw the
threaded metal ring.
2. Screw the pivot
mount on to the
top of the metal
desk stand.
4. Please swing
the microphone
clockwise, swing
the microphone
counterclockwise
will damage the
pivot mount.
Make sure the front of the microphone
points towards your mouth.
3. If necessary, adjust the
microphone angle with the
pivot mount thumbscrew.
(turn left for loosening, turn
right for tightening)
5. Screw the threaded
metal ring to adjust
microphone angle
360° horizontally.