Plug & Play; Safety Instructions - LORGAR LRG-CMT313 Manual De Instrucciones

PLUG & PLAY
Plug the USB cable into the USB port of your computer. Your computer will
automatically recognize the USB device and install a driver. The driver will
be installed automatically. If the microphone is not picking up sound, please
follow the instuctions below:
Problem
A computer couldn`t
identify the USB devices
The microphone is
detected but no output of
the sound
The microphone is
detected but no output of
the sound after updating
Windows 10

SAFETY INSTRUCTIONS

Read carefully and follow all instructions before using this
product.
1. Do not expose the device to excessive moisture, water or
dust. Do not install in rooms with high humidity and dust level.
2. Do not expose the device to heat: do not place it close to heating
appliances, and do not expose it to direct sun rays.
3. Clean the device with dry cloth only.
WARNING
It is forbidden to dismantle the device. Attempt to repair this device is not
recommended and leads to warranty waste.
WARRANTY
The warranty period starts from the day of the product purchase from Lorgar
authorized Seller. The date of purchase is the date specified on your sales
Solution
Please restart a computer and connect
the microphone to another USB port.
Make sure that System Sound isn`t
mute and you haven`t set a microphone
volume to minimum.
To let apps access the microphone, please
select Settings>Privacy>Microphone,
then turn on Allow apps to access your
microphone.