First Steps - Ebinger E-RAIN 32-100 Manual De Instrucciones

DE EN

4. First steps

Before starting, the following basic settings must be observed on the device:
Motor installation:
To install the motor, position it on the rod (fig. 1). The motor must engage with the square.
When correctly installed, the bearing flange on which the motor is installed will sit very close to the
brake (fig. 2).
fig.. 1
Transportation position:
The motor is in the transportation position as soon as the locking bolt is inserted in Position 1 (fig. 3).
The limit switch is deactivated when the hose has been completely retracted (fig 4).
The sprinkler trolley is also suspended on the rail for transportation (fig. 5).
1
fig. 3
FR ES
fig. 2
fig. 4
IT
fig. 5
15