Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
1. Remove contents from carton.
Rotating
Seat
2. Assemble legs by inserting the
height adjustment legs into the rubber
Seat Handle
Receptacle
tip. Make sure to put the tips on the
Leg
end without the brass push pin. Repeat
for 3 other legs.
Storage
Tray
3. Insert the height adjustment leg into
Height
larger leg receptacle by depressing the
Adjustment
Leg
brass push pin. Repeat for 3 other legs.
Rubber
Tip
4. Lay seat upside-down on a flat
surface. Insert each leg into the seat
depressing the brass push pin on the leg
receptacle and inserting into the bottom of the seat. A click can be heard
when the leg is securely in place. Repeat for 3 other legs.
5. Turn the bath bench right-side-up. Attach the soap tray by placing it
between the legs and inserting the cross braces into the receptacles on the
white leg collars.
Adjusting Leg Height
1. Before use, adjust the height of each leg to your specific needs, making
sure all legs are at the same height. When desired height is reached, lock
legs into place by aligning buttons into proper holes.
2. To be sure legs are locked into place, push down on or pull up on the legs.
Rotating Seat
1. To rotate seat, pull up on handle until seat is free of one of the 4 locked
positions and rotate to desired position. Seat can rotate in both directions.
Note: Built into the seat frame are 4 locking positions which will secure the
seat in place to allow the user to safely stand up from or sit down on the seat.
Make sure the seat is in one of the locked positions before standing or sitting.
RTL12061EU (2021-03)
2/12
Publicidad
