WERKU WK400510 Instrucciones Originales página 2

ENG ORIGINAL INSTRUCTIONS
TÜV-GS DECLARATION CONFORMITY.
Werku ® declares that the WK400510 hoist frame is in
accordance with the following Standards:
BGV D 6/10.00 German Equipment and Product
Safety Law (Par 4 Art 1 or 2 / Par 7 Art 1).
La Coruña, 01/07/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Load capacity ................................................... 600 kg
Length ............................................................ 750 mm
Subjection base diameter ................................ 48 mm
Net weight ......................................................... 4.5 kg
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear feet protection
Wear head protection
Wear hand protection
TÜV Rheinland-GS certification
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions. Failure
to follow all warnings and instructions listed below
may result in serious injuries. Keep all warnings
and all instructions for future reference. Accidents
can be avoided in many cases by recognizing a
potentially hazardous situation before it occurs and
by observing appropriate safety procedures. Do not
use this hoist frame for other applications than those
specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and dark
areas invite accidents. Do not handle this hoist frame
in explosive atmospheres, such as in the presence
of flammable liquids, gases or dusts. Keep away
from children and curious while operating a this hoist
frame. Distractions can cause you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
common sense when operating this hoist frame.
Do not use this hoist frame while tired or under the
influence of drugs, alcohol or medicines. A moment
of inattention while operating this hoist frame power
may cause serious personal damage.
USE PPE'S.
Use protection glasses according to EN166.
Use protection helmet according to EN397. Use
protection gloves according to EN388 (minimal
level 2). Use protection shoes according to EN ISO
20345:2011 (minimal level SB). If required by the
type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times. This enables better control of the panels in
unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught
in moving parts.
STORAGE.
Store this hoist frame out of reach of children and
do not allow the handling of it to people unfamiliar
with this hoist frame or its instructions. This hoist
frame is dangerous in the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
there are no broken parts or other conditions that
may affect the operation of this hoist frame. The
use of the this hoist frame for applications other
than those intended could result in a dangerous
situation. Please check the hoist frame serviced by
a Werku official repair service using only identical
®
replacement parts. This will ensure the safety of
this hoist frame is maintained.
BEFORE STARTING WORK.
Make sure that all the screws in the hoist frame are
perfectly tightened. Make sure that the possible
2
English