WERKU WK602360 Instrucciones Originales página 3

ENG ORIGINAL INSTRUCTIONS
return springs and the cable and replace if worn.
Check the operation of the winch (the load should
remain in position if the brake is released). Check
operation before use.
PANEL-BOARD TROLLEY SAFETY PRECAUTIONS.
Check for damaged parts before each use. Carefully
check that the panel-board trolley will operate properly
and perform its intended function. Replace damaged or
worn parts immediately. Never operate the panel-board
trolley with a damaged part. Inspect the panel-board
trolley for good working condition prior to storage and
before re-use. Do not exceed the rated load capacity.
Load must be evenly distributed on platform to insure
stability. Always operate on a level surface. Use caution in
moving a loaded panel-board trolley. Avoid obstructions
and floor defects. Do not use to transport people or
animals.
DESCRIPTION OF THE PRODUCT.
The panel-board trolley is a manual tool for transport
panels for ceilings and false ceilings. Refer to this
plan to familiarize yourself with the panel-board
trolley before use.
2
1
4
4
1. Platform.
2. Screw set A.
3. Screw set B.
4. Fixed wheels.
5. Outer tube.
6. Swivel wheels.
7. Handle tube / Panel-board support.
8. Handle support tube.
7
8
USE INSTRUCTIONS.
Before starting up the panel-board trolley, we
recommend that you carefully read all of the
instructions as indicated. Please respect all
regulations regarding the prevention of accidents,
health and safety directives, laws and applicable
restrictions for work places. The panel-board trolley
must only be used by persons who have been
instructed in its use and only for the purposes for
which it has been designed.
ASSEMBLY INSTRUCTIONS
Unpack all components on a flat and level surface.
You will find two different types of wheels. Two
swivel wheels and two fixed. Attach the wheels to
the base of panel-board trolley using the screw set
A (1). It is recommended that you mount the two
swivel wheels along one side, as this will give you
the best possible options for mobility (2). Insert the
handle assembly into the holes on the panel-board
trolley and secure with the screw set B (3). Make
sure all hardware is tightened, then the panel-board
trolley is ready for your use.
OPERATING INSTRUCTIONS.
Place the panel-board trolley on the floor evenly. Put the
object onto the middle of the body of the panel-board
trolley, and then push the frame slightly (4).
3
MAINTENANCE.
The panel-board trolley has been designed for a long
working life with minimum maintenance. Optimum
use depends on correct care of the panel-board
trolley and regular cleaning. The panel-board trolley
may be cleaned effectively using compressed air
after each use. If compressed air is not available,
use a brush to remove dust from the panel-board
5
trolley. Cetain cleaning agents and solvents damage
6
plastic parts, among them are gasoline, carbon
tetrachloride, chlorinated cleaning solvents, ammonia
6
and household cleaners containing ammonia. Do not
use any of these to clean the panel-board trolley.
WARRANTY AND TECHNICAL SERVICE.
Werku offers a warranty that covers the repair
®
of all defects found due to faults in the materials
or manufacture. For this cover to be effective it is
necessary for these defects to appear within the
validity period. The consumer is entitled to free
repair of all defects (shipping costs, labour costs
3
English