Battery Charge Indicator - Doro 525 Manual De Instrucciones

Connection
1. Connect the mains adapter (6V DC) and the telephone cord to the wall sockets.
2. Insert the batteries(AAA 1.2V 600mAh NiMH) in the handset with plus and minus
terminals as directed.
3. Charge the handset with the keypad facing outwards (for 24 hours the first time).
Range
The telephone's range will vary normally between 50 and 300 metres, depending on whether
the radio waves carrying the conversation are blocked by obstacles in their path. The range
can be improved by turning one's head so that the handset is aligned with the base unit.
Sound quality declines as the limit is reached until the call is finally dropped.
The symbol is showed inside the range and flashes until lost outside the range.
6
Battery
Because batteries only have a certain lifespan it is quite normal that call time and standby
time will decrease somewhat compared to the specifications when the telephone is used
regularly. Batteries that have been fully charged (10 hours) will last for approx. 100 hours
in standby or approx. 10 hours call time. These times apply at normal room temperature.
Full battery capacity will not be reached until the batteries have been charged 4 to 5 times.
The base unit has an automatic charging mechanism that prevents the batteries from
being overcharged or damaged due to prolonged charging.

Battery Charge Indicator

When charging, the battery symbol will flash as long as the handset is placed in the
charger and will not stop flashing even when full.
If the batteries are running low will be displayed, although calls can still be made and
received the phone must be replaced on the charger should a warning tone be heard during
a call. Failure to recharge the batteries will result in the telephone ceasing to function.
Making a call
1. Enter the required number (
2. Press to dial the number. Press
q
Receiving a call
1. Wait for the handset to ring. Lift the handset.
2. Press
to answer. Press
q
Please note!
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to
connect to a call.
The charging connections should be cleaned regularly with a soft cloth or eraser.
The base unit should not be located close to other electrical equipment, in direct sunlight or near any other
strong heat source! This is to minimize the risk of interference.
It is normal for the device to become warm during charging and not dangerous.
Use only DORO original batteries. The guarantee does not cover any damage caused by incorrect batteries.
English
=delete).
C
to terminate call.
q
to terminate call.
q