Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
product's distributor may cause
personal or material risks or
injuries.
Make sure that the fan is on a
•
stable surface when operating
to prevent overturning.
Do not immerse in water.
•
If the power cord is damaged, it
•
must be replaced by a qualified
person, to avoid risks.
Children should be supervised
•
to make sure they do not play
with the appliance.
This device is not designed to
•
be used by people (including
children)
physical, sensory or mental
abilities or lack of experience
and knowledge, unless they
are supervised by a person
responsible for their safety.
Children should not play with
•
this
device.
maintenance should not be done
by children if they are not under
supervision.
PRODUCT FEATURES
The contents of the package will contain
the following. See pictures 01 on pages 4.
Note: The picture is for reference only. The
content may vary depending on the model.
Packaging content:
1. Handle
2. Air Outlet
3. Control panel
4. Air inlet
5. Base
You can check the product features in table
01 on page 7.
14
with
reduced
Cleaning
and
ASSEMBLY AND INSTALLATION
Before using this appliance, remove the
packaging and inspect the fan. If the
appliance may be damaged, please contact
the store where you purchased it.
NEVER OPERATE THE FAN
WITHOUT
OTHER PARTS. OPERATE THE
FAN
POSITION;
POSITION MAY BE DANGEROUS FOR THE
USER.
Assemble the base and other parts of the
appliance considering the following notes
(see picture 02 on page 5):
C.
Remove the lock nut from the base.
D.
Place the main body on the base
considering the center hole. Once both
parts are aligned, fix them with the luck
nut.
6. Lock nut
7. Center hole
8. Base
Note:
When
installing
place the machine upside down on the
packaging foam or other soft surface to
avoid scratching.
USING YOUR APPLIANCE
Note: Before inserting the plug into an
electrical outlet, make sure that the
voltage corresponds to that indicated on
the product label, and that the plug has a
ground connection.
Mechanical tower fan (control panel, see
picture 03 on page 5)
9. Position
: select this function to
enjoy
mínimum
oscillation of the device.
10.
Position
to enjoy medium speed without
ITS
BASE
ONLY
IN
VERTICAL
ANY
OTHER
the
chassis,
speed
without
: select this function
AND
Publicidad
