Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
THIS PRODUCT CONTAINS NO SERVICEABLE PARTS.
IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN
DROPPED, DAMAGED, LEFT OUTDOORS, OR DROPPED INTO
WATER, CALL CUSTOMER SERVICE AT 1-800-406-2005 PRIOR TO
CONTINUING USE.
ACCESSORIES
Look for these accessories on Hoover.com or
Hoover.ca or call 1-800-406-2005.
GENUINE PARTS AND ACCESSORIES:
We recommend using only with genuine
HOOVER® solutions (for carpet and spot clean-
ers), parts, and accessories. Damage caused
by use with other than genuine HOOVER® solu-
tions, parts, and accessories is not covered by
and may void YOUR WARRANTY.
WARNING:
Risk of personal Injury, brush roll may suddenly restart. Turn power switch OFF and remove battery before
cleaning or servicing.
Problem
Possible Cause
Vacuum has no power
1. Pressed power on hand vacuum instead
of upright.
Vacuum feels loose
1. Vacuum not assembled properly.
Hand Vacuum powers off 1. Vacuum is in upright mode.
2. Full dirt cup.
3. Vacuum is clogged.
4. Filter is dirty.
DUST CHASER
Problem
Possible Cause
Low or No Suction
1. Full dirt cup.
2. Vacuum is clogged.
3. Filter is dirty.
Vacuums powers off and
1. Full dirt cup.
lights flash
2. Vacuum is clogged.
3. Filter is dirty.
Every ONEPWR
battery works with every ONEPWR
™
Battery:
2.0 Ah
3.0 Ah
3.0 Ah MAX
4.0 Ah
4.0 Ah MAX
6.0 Ah
Parts and Accessories:
Charger
Dual Bay Charger
0.5A Compact Charger
1.5A Compact Charger
ONEPWR™ Dust Chaser™ Hand Vacuum
Hand Vacuum 2-in-1 Crevice/Dusting Tool
Hand Vacuum Upholstery Tool
Evolve Upright Filter
Dust Chaser™ Hand Vacuum Filter
Dust Chaser™ Hand Vacuum Filter Access Door
Dust Chaser™ Hand Vacuum Adapter
Possible Solution
1. Use upright power on the vacuum shoulder.
1. Ensure adapter fits into body and hand vacuum fits into
adapter. You should hear an audible "click".
1. Hand Vacuum should be removed from adapter.
2. Remove and empty dirt cup.
3. Check for clogs:
-nozzle inlet
-dirt cup flapper
4. Rinse filter & let dry 24hrs.
Possible Solution
1. Remove and empty dirt cup.
2. Check for clogs:
-nozzle inlet
-dirt cup flapper
3. Rinse filter & let dry 24hrs.
1. Remove and empty dirt cup.
2. Check for clogs:
-nozzle inlet
-dirt cup flapper
3. Rinse filter & let dry 24hrs.
product.
™
Model #
BH15020
BH15030
BH25030
BH15240
BH25040
BH15260
BH05000
BH05200
440014514
440014513
BH57010NP
AH43800PC
AH43810PC
AH43000
AH44100
440014473
AH43020PC
Publicidad
