Publicidad
Idiomas disponibles
Idiomas disponibles
English
LED Indications
INDICATION
USER ACTION
Unit ON
Press the
power ON/OFF button
Unit OFF
Press the
power ON/OFF button
Plug tool into computer
via USB
Full Charge
Medium
Charge
Low Charge
Cycle
Attempt a crimp/press
Complete
Cycle Not
Attempt a crimp/press
Complete
Maintenance
Warning
Final
Maintenance
Warning
Needs Service
Temperature
Out of Range
12
LEDs
All three LEDs (
,
21
22
8
All three LEDs (
21
,
22
8
21
Maintenance LED
nOTE: Indication is permanent as soon as tool is plugged in via USB.
Battery state of charge LED
nOTE: Indication is permanent as soon as tool is switched ON.
Battery state of charge LED
nOTE: Indication is permanent as soon as tool is switched ON.
Battery state of charge LED
turns OFF automatically.
nOTE: Indication is permanent as soon as tool is switched ON.
22
Cycle Complete LED
22
Cycle Complete LED
nOTE: No action is possible until user presses power ON/OFF button.
21
Maintenance LED
nOTE: 500 cycles left. Indication is permanent as soon as tool is
switched ON.
21
Maintenance LED
nOTE: 100 cycles left. Indication is permanent as soon as tool is
switched on.
21
Maintenance LED
OFF automatically.
nOTE: Zero cycles left.
21
Maintenance
and Cycle Complete
red continuously.
nOTE: Indication is permanent as soon as tool is switched ON.
LEDs will turn off when an acceptable operation temperature is reached.
,
) light in green for one second.
23
,
23
) light in red for one second.
illuminates in blue continuously.
23
illuminates in green continuously.
23
illuminates in yellow continuously.
23
illuminates in red for ten seconds, then tool
flashes in green for five seconds.
flashes in red for 5 seconds.
illuminates in yellow continuously.
flashes in yellow continuously.
illuminates in red for ten seconds, then tool turns
22
LEDs illuminate in
EXAMPLE
GREEN
RED
BLUE
GREEN
YELLOW
RED
GREEN
RED
YELLOW
YELLOW
RED
RED
Publicidad
