Publicidad
(Pb-Acid batteries, gel batteries and battery chargers)
will safeguard the performances, the service life, the
safety and the economic value invested.
4.1.2. BATTERY CHARGER
This type of high-frequency battery charger efficiently
charges batteries, extending their operating and ser-
vice life. In addition, because they can be configured,
it is a very versatile solution; the same battery charger
can be used for both Pb-Acid batteries and for gel bat-
teries.
• It should not be taken for granted that batteries
and battery chargers with the same technical fea-
tures as those we offer will produce the same results.
Only perfect compatibility between these elements
(Pb-Acid batteries, gel batteries and battery chargers)
will safeguard the performances, the service life, the
safety and the economic value invested.
4.2.
STRUCTURE AND FUNCTIONS
4.2.1. MACHINE
Photo A
1
Recovery tank
2
Operator's seat
3
Solution tank
4
Rear wheel
5
Bumper wheel
6
Splash guard
7
Front steering motorwheel
8
Compartment for electric components
9
Steering wheel
Photo B
1
Blinker
2
Recovery water tank drain hose
3
Recovery water tank drain hose plug
4
Solution water tank filler plug
5
Suction hose
6
Rear cover of the suction compartment
Photo C
1
Blinker
2
Opening knob of the suction
compartment
3
Rear cover of the suction compartment
4
Suction motor compartment
5
Suction filter
Photo D
1
Solution water tank drain valve
Photo E
1
Squeegee bumper wheels
2
Squeegee pressure adjusting knob
3
Squeegee fast fixing knob
4
Squeegee inclination adjusting knob
5
Suction hose
6
Squeegee blades replacement knobs
7
Squeegee wheels
Photo F
1
Solution water filter
Photo G
1
Battery compartment with 6V batteries
2
Suction motor
3
On- board battery charger
Photo H
1
Chopper control board
2
Traction motor fuse
3
Suction motor fuse
4
Brush motor fuse
Photo I
1
Battery charger cover
2
Red LED - Battery discharged
3
Green LED - Full charged battery
4
Dip-Switches
5
Plastic cap to access the Dip-Switches
6
Dip-Switches for PB-Acid/GEL battery
setting
7
Table with Dip-Switch settings for
PB-Acid/GEL charging curve
Photo L1
1
Electromechanical brake fork lever
Photo L2
1
Unblocking lever
2
Pin
Photo L3 - L4 - L5
Electromechanical brake unblocking procedure
Photo M
1
Key switch
2
Traction speed increase push button
3
Traction speed reduce push button
4
Suction motor operating push button
Squeegee lifting/lowering
(UP / Plus)
5
Brush motor operating push button
Brush plate lifting/lowering
(UP / Plus)
6
Forward/reverse traction selector
7
Brush motor thermal breaker
8
Electric horn
9
Operating informations display
Photo N
(UP / Plus)
1
Solution water dosing lever
2
Battery connector
3
Accelerator pedal
34
Publicidad
