Listening To Phono - Fenton NASHVILLE Manual De Instrucciones

RECORDING THE CD/MP3
Recording
1. Insert the USB stick/cable into the USB port (make sure that the USB stick is fat32 formatted).
2. Follow the same procedures as with the ''Listening to the CD disc/MP3'' section. Press USB/REC (the ''REC ONE'' icon
appears on the display).
3. Press the PREV/NEXT buttons to select ONE (single song recording), FOLDER (mp3 disc only), or ALL (complete cd
recording) to record.
Single song recording:
Select ONE, ''ONE'' icon appears on the display. Press the USB/REC button to confirm recording the current song. The display
will show ''Please wait...'' for a few seconds, then the ''REC'' icon will flash on the display.
Press the STOP button to stop recording or wait for the unit to stop automatically when the song is finished. The display will
show ''End recording''.
Folder recording (MP3):
Select FOLDER, ''FOLD'' icon appears on the display. Press the USB/REC button to confirm recording the folder. The display
will show ''Please wait...'' for a few seconds, then the ''REC'' icon will flash on the display.
Press the stop button to stop recording or wait for the unit to stop automatically when the folder is finished. The display will show
''End recording''.
Whole CD Recording:
Select ALL, ''ALL'' icon appears on the display. Press the USB/REC button to confirm recording the CD. The display will show
''Please wait...'' for a few seconds, then the ''REC'' icon will flash on the display.
Press the stop button to stop recording or wait for the unit to stop automatically when the CD is finished. The display will show
''End recording''.
4. To listen to the recording, repeatedly press CD/USB or MODE to select the USB mode. The USB indicator appears on the
display. Press the PREV/NEXT buttons to select the desired recording.

LISTENING TO PHONO

1. When the unit is on, press MODE until the PHONO indicator appears on display to select the phono mode.
2. Remove the stylus cover from the stylus and release the Tone arm rest
3. Place a record on the turntable platter and select the desired speed (33/45/78) according to the record.
NOTE: If you are playing 45RPM records, place the 45 RPM adapter on the center spindle.
4. Push up the lift lever to raise the tone arm and gently move the tone arm to the desired position over the record. Push down
the lift lever, move the tone arm slowly onto the record to start playing.
5. Adjust the volume control to your desired level.
6. If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when playback ends. If Auto Stop switch
is turned OFF, record will NOT stop automatically when playback ends.
Remark: Certain types of records may have an auto-stop area outside the preset limit, so the turntable may stop before the last
track finishes, or before the record has finished. If this occurs, set the auto-stop switch in the "OFF" position.
RECORDING THE PHONO
1. Insert the USB stick/cable in to the USB port (make sure that the USB stick is fat32 formatted).
2. Follow the same procedures as with the ''listening to the phono'' section. Press the USB/REC button (the ''REC'' icon
appears on the display). The display will show ''Please wait...'' for a few seconds, then the ''REC'' icon will flash on the
display. The unit will start recording.
3. Press STOP to stop recording, ''End recording'' will appear on the display.
4. To listen to the recording, repeatedly press the CD/USB or MODE button to select the USB mode. The USB indicator
appears on the display. Press the PREV/NEXT buttons to select the latest file on the USB-drive to play.
AUX IN
1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack (3.5mm) located on the front of the record player. (cable
not included)
2. Press MODE until "AUX" appears on the display to select the AUX mode.
3. Start playback on your auxiliary source.
4. Adjust the volume to desired level.
RECORDING THE AUX IN
1. Insert the USB stick/cable in to the USB port (make sure that the USB stick is fat32 formatted).
2. Follow the same procedures as with the ''Aux in'' section. Press the USB/REC button (the ''REC'' icon appears on the
display). The display will show ''Please wait...'' for a few seconds, then the ''REC'' icon will flash on the display. The unit will
start recording.
3. Press STOP to stop recording, ''End recording'' will appear on the display.
4. To listen to the recording, repeatedly press the CD/USB or mode button to select the USB mode. The USB indicator appears
on the display. Press the PREV/NEXT buttons to select the latest file on the USB-drive to play.
6