Method One: Using Wps Button(En) - Cudy RE1800 Manual Del Usuario

Method One: Using WPS Button(EN)

1. Plug the extender next to your router, and wait until the
LED turns solid on.
2. Press the WPS button on your router, and then press the WPS
button on the extender within 2 minutes.
WPS
Flash Solid On
WPS
Press 1 second
— 1 —
3. Then the LED will start to flash，wait until the
LED turn solid on, which means the extender connects to
your existing host WiFi network.
If the LED does not turn solid on after 2 minutes, try step 2 again.
If still not work, try Method Two: Using Web Browser, or contact our
support team support@cudy.com.
4. Connect your device to the extender's WiFi network.
The extender's new WiFi network name is based on your Host
WiFi network name, with —EXT2G or —EXT5G at the end of the
name.
For example:
• Host WiFi network name:
YourNetworkName
• New extended WiFi network name:
YourNetworkName—EXT2G
YourNetworkName—EXT5G
Use the same WiFi password that you use for your WiFi router.
LED and
Flash Solid On
Pairing process
Flash Solid On
Connection process
— 2 —