Descargar Imprimir esta página

General Guidelines - Songmics 0BN063 Instrucciones De Montaje

Publicidad

EN
General
Guidelines
Please read the following instruction
carefully and use the product accordingly.
Please keep this manual and hand it over
when you transfer the product.
This summary may not include every detail
of all variations and considered steps.
Please contact us when further information
and help are needed.
Warnings
Please use the chair properly. Incorrect use,
such as using it as climbing tool or sitting on
the armrest is not allowed. Children must be
under adult supervision to use the product.
Unauthorized change and modification may
affect the safety.
During the assembly process, keep small
parts out of the reach of children. It may be
fatal if swallowed or inhaled.
To avoid potential danger of suffocation,
keep all parts and packaging (films, plastic
bags and foam, etc.) away from babies and
children.
14
Notes
Please check if the components are intact before the assembly and strictly adhere to the
instruction. Incorrect assembly or damaged component will have risk of injury.
Never use the product if any component is missing or defective.
When assemble the armest, correctly postion the screws into the holes and then
gradually tighten them.
The round knob under the seat is to adjust the tilt tension of the backrest and adapt to
your body and personal preferences. Make sure you have enough tension so you don't fall
backward when leaning back.
The product is intended for indoor use by one person.
The maximum static load capacity is 150 kg (330 lbs), the armrests can support up to
68 kg (150 lbs).
Do not overload the armrests to avoid damage.
Note: Please place the office chair on level grounds and keep the base in full contact with
the ground. Do not sit only on the edge of the chair. When standing up, please hold the
armrests firmly. Dangerous actions such as playing or stooping on the seat may lead to
unbalance.
The wheels of this office chair are suitable for nearly all kinds of floors, please use a
protective mat for laminate and parquet floors.
Only professional technicians can disassemble or replace the auto-return cylinder.
Never stand on the chair or use it as a ladder or climbing tool.
Avoid direct exposure to strong sunlight. Keep the product away from sharp objects.
Please check the firmness of connections regularly. If necessary, tighten the screws.
Please note that each type of screws has a spare screw.
To perform routine maintenance, please check the position when the squeak occurs, and
try to apply lubricant between the metal parts to alleviate the issue.

Publicidad

loading