Worx WX020 Manual Original página 14

Setting the volume
-Turn the volume knob on the trigger
clockwise to increase the volume.
-Turn the volume knob on the trigger
counter-clockwise to decrease the
volume.
Adjusting the air flow
Turn the air flow control from 1-10
according to your work .
Spray pattern adjustment
Adjusting spray shape
-Horizontal pattern ('up and down'
spraying motion)
- Vertical pattern('side to side'spraying
motion)
Adjusting spray width
-Wide pattern (for spraying large
surfaces)
-Narrow pattern(For spraying smaller
areas, corners and edges)
OPERATION
Checking the battery charge
condition
NOTE: Fig. G1 only applies for the bat-
14
tery pack with battery indicator light.
Charging the battery pack
Installing the battery pack
Press the trigger
USER TIPS
1. Position the tool 15-20cm from the
spray surface, depending upon the spray
pattern size desired .Spray parallel to
the surface with smooth passes at a
consistent speed.
2. Apply a thin layer of liquid on the first
pass and allow to dry before applying a
second, slightly heavier coat.
3. It is recommended to partially pull
trigger first in order to start the turbine
before a spray pass is made.
****It is not necessary for most liquids when used
with the nozzle of larger diameter. For use with the
nozzle of smaller diameter , thinning may be needed
to acheive a finer finish.If thinning is necessary, use
the filling cup to adjust as you need(See Fig.A3).
20V Cordless Brushless Paint Sprayer
See Fig.
D1
See Fig.
D2
See Fig. E
See Fig.F
See Fig.
G1
See Fig.G2
See Fig.G3
See Fig. H
EN