Publicidad
Idiomas disponibles
Idiomas disponibles
9
Reversing the door
T he side at which the door opens can
be changed, from the left side (as
supplied) to the right side, if the
installation site requires.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need:
�
8mm socket wrench
Cross-shaped screwdriver
a:::
�
Thin-blade screwdriver
Note: Before you start lay the
refrigerator on its back in order to
gain access to the base, you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
1. Stand the refrigerator upright.
�
:::@
Bmmwrench
2. Open part CD
refrigerator body from left side and then
take down part @ and part @ on the
door in the same way. Take down part
® and put it back to the plastic bag.
3. Disconnect electrical connectorCDas
well as electrical connector® and then
take down part@.
4. Remove the screws CD ,
wire®, and remove part@.
on top of the
loose
Publicidad
