INSTALLATION INSTRUCTIONS
We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please
do not hesitate to contact us at the phone number listed at the bottom of the page.
Observe all local plumbing and building codes.
Shut off the main water supply.
The finished wall or bath/shower unit must be installed prior to installing this trim.
We recommend that you determine if the maximum water temperature is acceptable before installing this
trim. If temperature adjustment is needed, refer to the Water Temperature Adjustment section.
The valve shuts off by water pressure. Do not force the handle in any direction. To turn the valve off, gently
turn it to the "Off" position.
KALLISTA reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
1491056-2-A
3 of 14
THANK YOU FOR CHOOSING KALLISTA
BEFORE YOU BEGIN
Pressure Balance Trim
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.