Hub Installation; Precision Nozzle And Round Brush Installation; Long Hose Installation - Create Steam Cleaner PRO 9 Manual Del Usuario

HU B INSTALL ATI ON
1. Point the hole of the slotted parts of the concentrator to the steam outlet hole of the main
body.
• Point the white dot of the hub to the unlock position of the main body.
2. Confirm that the hub is inserted into the end of the main body, then turn the hub clockwise.
• Turn the hub clockwise, aim the white dot of the hub at the unlock position of the main
body. Please confirm that the hub and the main body are connected well and there is no
gap in the connection.
• If you find water droplets from the connection, do not use the product.
PRECISI ON N OZ Z LE AND ROUND B RUSH IN STA L L ATIO N
Insert the steam outlet hole into the hexagonal section of the precision nozzle. Make sure
the nozzle is installed correctly before use. The round brush is installed in the same way as
the precision nozzle.
LO NG HOSE IN STALL AT I ON
Point the spiral mouth of the main body towards the spiral hole of the long hose. Turn to the
right and make sure it is installed correctly.
E NGL I SH
10
1
2