Wand And Attachments - Titan TCS973 Manual De Usuario

OVERLOAD PROTECTOR / BELT RESET
1. The overload protector protects the motor from brush jamming and belt breakage. If the
agitator slows down or stops, the overload protector shuts off the brush and the brushroll
status indicator admits red light.
2. To correct the problem: Turn off the vacuum cleaner, remove the obstruction, then turn
on the vacuum cleaner again. The brushroll status indicator will be off.
3. If the problem persists, have the vacuum cleaner serviced by a qualified service agent.

WAND AND ATTACHMENTS

WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
1. To install the wand, insert the lower wand onto the motorized nozzle until the wand locks
into place.
Brushroll Status Indicator
-5-