Maintenance And Cleaning; Product Disposal - UFESA SKIPPER MB6000 Manual De Instrucciones

HOW TO TRIM BEARD
For di erent beard styling please refer from Fig.7 to Fig.12

MAINTENANCE AND CLEANING

Unplug the product when you do not intend to use it for an extended period of time to
prolong its shelf-life. Allow the device to cool down prior to storage. Separate the tool head
from the body and use the cleaning brush to remove dust from the internal parts (Fig.13).
Apply a drop of oil on one of the edges of the blades for their maintenance, and turn on the
device for a few seconds to distribute it. This should be done when you notice a certain
amount of di culty during the trimming operation (Fig. 14)
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical products must never be
used for the same.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic
Equipment), provides the legal framework applicable in the European Union
for the disposal and reuse of waste electronic and electrical devices. Do not
dispose of this product in the bin, instead going to the electrical and electronic
waste collection center closest to your home.
The product may contain batteries. Remove them before disposing of the
product and dispose in special containers approved for this purpose.