Venga VG M 3015 Manual De Instrucciones página 18

2.
3.
4.
5.
VG M 3015
1. Place the food you wish to process into
the jar (31).
2. Put the blender lid (30) onto the jar and
ensure it covers well.
3. Place the middle cap(29) into the hole
in the blender lid.
1. Place the jar assembly in the motor
house, so that the arrow is aligned with
the circle. Turn it clockwise, so the arrow
is aligned with the arrow.
2. Plug the power cord into the main
power outlet and switch on the
appliance.
3. Turn the Speed control knob to speed
1(or any speed setting). The indicator
light on the control panel will now be
illuminated.
4. Select the speed you want using the
four speed buttons. Recommended
speeds are shown in the table above.
1. Stop the appliance by pressing the OFF
button after use. Switch off the
appliance using the switch and unplug
it before you change the accessories,
take the appliance apart or when not
in use.
2. To detach the jar assembly, turn the jar
so the arrow is aligned with the circle
and then remove it.
3. Remove the blender lid. You may now
take out the processed food.
Fit the blender protective cover to the swivel
arm again.
18