Scheme; Updating Unit Software From Usb Key; Maintenance; Filter Replacement - aldes InspirAIR Top Serie Instrucciones De Instalación

5.3. Scheme

CO Sensor Aldes
2
Nx/Lx
N3/L3
N1/L1
0V 1V 2V 3V 4V 5V 6V

5.4. Updating unit software from USB key

The software can be updated with the following procedure:
1) Stop the product (power it off)
[Open the door for Classic models]
2) Insert the USB key into the USB port
3) Power the product back on
4) Wait for the LED to turn green or about 30 s
5) Remove USB key
The USB key must only contain the update file supplied by Aldes.

6. MAINTENANCE

6.1. Filter replacement

Filters must be changed regularly depending on use conditions and the machine's environment. The installer can configure the filter timer from nine to twelve
months.
1.
Open the filter flap.
Filter references
Item Description
11023490 Dust filter
11023491 Pollen filter
11023492 Particle filter
11023493 Fine particle filter
11023494 Bacteria filter
11023495 VOC filter
* We recommend using a Dust filter 11023490 in addition to these filters to guarantee their lifetime and effectiveness.
Flow or Speed
N3/L3
N0/L0
0-10 V
(volt)
7V 8V 9V 10V 0V 1V
1,5 V
Left
Standard Top 300
Standard Top 450
0-10V Proportional
2V 3V 4V 5V 6V 7V 8V 9V 10V
9,5 V
2.
Remove the filters and replace them with new ones.
If configuration A
Right
Right only
Right only*
Right only*
Right only*
24
0-10 V
(volt)
If configuration B
Left Right
Standard Top 300
Standard Top 450
Left only
Left only*
Left only*
Left only*