Bluetooth Devices - jp.ik MOVE S102 Manual Del Usuario

To add a Wi-Fi network, touch this icon which you can be found in the
upper right corner of the screen.
This will open an options menu, and select "Add network" to open the dialog
box as shown below.
Disabling an automatic Wi-Fi connection
If you do not want the device to automatically connect to a specific Wi-Fi network
that you have previously configured, do the following with the Wi-Fi screen:

9.2 Bluetooth devices

Bluetooth is a short-range wireless communication technology standard. It is
used to connect to a peripheral device, such as a keyboard, a mouse, a printer,
a headphone, a set of speakers, and so on.
Enabling and disabling the Bluetooth
To enable or disable the Bluetooth function, do either of the following:
• Open the Quick Settings panel and switch Bluetooth button to ON;
• Open the Settings screen and switch Bluetooth button to ON;
When enabled, the Bluetooth icon is displayed on the system bar.
When you are not using Bluetooth, turn it off to extend the battery life.
Type the required information for the network
and touch Save. By doing so, the information
about the network is saved. The Wi-Fi
connection will be established automatically
the next time you come within the range of
this network.
• Switch the Wi-Fi button to ON if it is set
to OFF.
• Touch the name of the Wi-Fi network. The
Wi-Fi status panel appears.
• Touch Forget on the low left corner. The
details of the Wi-Fi network are erased.
Opening Bluetooth screen
In the Settings screen, touch Bluetooth to open Bluetooth screen. The Bluetooth
screen shows your Bluetooth name and a list of available devices. In addition,
an icon appears in the upper right corner.
This is the menu icon. Touch it to show more setting options.
Changing your Bluetooth name
• Run the Settings app and turn on the Bluetooth button if it is disabled;
• Touch "Bluetooth";
• Touch the menu icon and touch "Rename the device";
• Type a new name, and then touch Rename.
Pairing with a Bluetooth device
To exchange data with another Bluetooth device, pair your device with the
Bluetooth device by doing the following:
Unpairing a Bluetooth device
To unpair a Bluetooth device, do the following:
• Open the Settings screen and touch Bluetooth;
• Locate the paired Bluetooth device and touch the settings icon;
• Touch Unpair to erase all pairing information for that device.
• Open Android Settings and turn on Bluetooth
if it is disabled;
• A list of device IDs is displayed in the
column named "Available devices";
• Touch the ID of the Bluetooth device you
want to pair with and follow the instructions
on both devices to pair them.
When the pairing is successful, the device
is listed under PAIRED DEVICES.
12