Charging Your Device - jp.ik MOVE S102 Manual Del Usuario

5. CHARGING YOUR DEVICE

If you are charging the device for the first time, it will take around 4 to 5 hours
to be fully charged.
To charge your device:
1. Plug the adapter into the USB Type-C, which you
can find in the I/O cabinet as shown in the figure;
2. Plug the adapter into a wall-socket.
Note:
Plugging the adapter with a remaining battery capacity above 90%, might prevent
the equipment from reaching its full charge.
• Connecting the charger improperly may cause damage to the device. Damages
caused by misuse are not covered by the warranty.
• The device can be used while it is charging, but the charging process may take longer.
• It is normal for the device to become warm during charging for long periods of use.
• Do not leave your device connected to the power supply once it is fully charged.
• Once it is fully charged, unplug the charger from the device, and then unplug it
from the electric supply. Use only accessories approved by jp.ik, like chargers,
batteries, and cables. Unapproved chargers or cables can damage the device
or the battery.
Only use the bundled power adapter. Unplug your device from the power supply
once it is fully charged. These devices are not designed to be left connected to the
power supply for long periods of time. Do not use the charger on other devices.
5.1 Battery charge status
To check the battery status, go to the battery status icon on the status bar. The
following icons represent the battery status of our devices:
Battery is fully charged.
Battery is starting to drain.
Battery is about to completely drain, and you should stop using your
device and charge it at once.
Battery is being charged.
5.2 Saving battery power
Our devices provide options that help you save battery power.
A battery is an expendable supply. Thus, when used over a long period, its capacity
is shortened. If the battery of your device is reduced to under a half of its initial
time, we recommend the purchase of a new battery.
When you don't use the battery for a long time, you must store it after charging
(we recommend you to charge it at least until 30% or 40% of its capacity). This will
extend the battery life time of your device.
By customizing some options, you can use the device during longer periods of
time between charges:
• Close unnecessary applications;
• Deactivate the Bluetooth and the Wi-Fi connection if not needed - To turn off
the Bluetooth, open the "Quick Settings" panel. Here either switch on Airplane
mode to disable all wireless connections, or switch off Bluetooth and Wi-Fi to
disable the features;
• Deactivate auto-synchronization of applications like Gmail, Calendar, Contacts
and other applications if not needed - To turn off the synchronization, open the
Settings screen and click on the app you want to stop, for example, touch Google
or the Email app, under Accounts category. Then, in the right corner, touch the
menu button and select "Cancel sync" to suspend the auto-sync function;
• Decrease the brightness of your display - To do so, open the Quick Settings
Panel, locate the screen brightness icon and then drag the slider to the left to
reduce screen brightness, or open "Android settings" and touch on "Display-
Brightness level". Drag the slider to the left to reduce the screen brightness;
• Turn off the screen when the device is temporarily not in use - Press the power
button once to turn off the screen;
• Power off your device when is not used for a while - To do that, press the power
button until the Power off menu is displayed, then touch Power off;
• Use of the GPS feature - Many apps work to pinpoint your location, thus
consuming battery life. You can reduce the power consumption using the
Battery Saving GPS mode, minimizing the number of reference points used
to find your location. To enable this mode, head to "Settings" > "Location">
"Mode", and enable "Battery Saving".
7