Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PLLA 12 B2 Traducción Del Manual De Instrucciones Original

Before use

Removing/charging/inserting the battery pack

CAUTION!
Always unplug the appliance before you remove the battery pack 5
►
from or connect the battery pack to the high-speed battery charger 9.
NOTE
► The battery pack is supplied partially charged. Before first use, charge
the battery pack 5 in the high-speed battery charger for at least
1 hour. This ensures maximum performance of the battery pack 5.
You can charge the lithium-ion battery at any time without shortening
its service life. Interrupting the charging process does not damage the
battery pack 5.
If the battery pack 5 overheats during operation, it cannot be
►
charged. Allow it to cool down first.
Never charge the battery pack 5 if the ambient temperature is below
■
10°C or above 40°C.
1. To remove the battery pack 5, press the release buttons 4 and pull the
battery pack 5 out of the appliance.
2. Insert the battery pack 5 into the high-speed battery charger 9.
3. Insert the mains plug into the socket. The control LED 0 lights up red .
4. The green charge level indicator LED q indicates that the charging
process is complete
5. Insert the battery pack 5 into the appliance.
PLLA 12 B2
and the battery pack 5 is ready for use.
GB │ IE │ 11 ■