Venga VG RVC 3001 Manual De Instrucciones página 7

2. Place the charging dock against
the wall. Make sure the area is
open and uncluttered, leaving at
least:
•
2 meters in front of the
charging dock
• 1 meter on both sides of the
charging dock
3. Plug the round connector of the
adapter into the power socket on
the charging dock and the other
end into a wall outlet.
Install the charging dock in a location
that your Venga! robot can easily
access. It is recommended to place
the charging dock against a wall, and
on a hard, level surface rather than on
a rug or carpet. Always keep the
charging dock plugged in, otherwise
the robot will not automatically return
to it. Make sure there are no obstacles
between the robot and the charging
dock, or the robot will not be able to
find the charging dock.
B. Install side brushes
Attach side brushes to the bottom of the
robot by pressing a brush into each slot.
C. Turn on the main power switch on
the bottom of robot
7 VG RVC 3001